230mm Replaceable Carbide Tersa Knife for Tersa R2000 Cutterhead

230mm Replaceable Carbide Tersa Knife for Tersa R2000 Cutterhead Reviews

Other Picture

230mm Replaceable Carbide Tersa Knife for Tersa R2000 Cutterhead Feature

• Knife is easy to install with minimal downtime
• Correctly adjusted knives with built in Chip-Limiter
• Knives clamped by centrifugal force and gib wedges - no screws
• Remember to order 2 of these knives - They are sold individually, but 2 are required.
• 230mm, Solid Carbide Knife

Knife is for use with the Tersa Revolution 2000 Cutterhead. **These knives comes in packs of 2 balanced knives, and price is for an indiviual knife. If you plan on ordering, order 2 of these knives and they will be sent together.** 230mm Length. TERSA knives are available in four qualities. Each has a built in chip-limiter and are available in a large range of sizes. 1350mm (53.15") HSS/M42/Chrome Steel. Solid Carbide knives are available up to 630mm (24.8"). Recommended uses: * Chrome: Softwoods only. * HSS: Best for all around use. Recommended for pine, oak, maple, cherry, etc. * M42: For tougher applications. Less likely to chip the cutting edge than HSS. * Solid Carbide: Most durable, reduced finish quality, recommended for hickory, exotic hardwoods, laminated woods, dirty material, glue lines.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 31, 2011 08:21:04

24-5/16 x 1-1/4 x 1/8 HSS Planer Blades - Whitney 105 - Set of 4.

24-5/16 x 1-1/4 x 1/8 HSS Planer Blades - Whitney 105 - Set of 4. Reviews

Other Picture

24-5/16 x 1-1/4 x 1/8 HSS Planer Blades - Whitney 105 - Set of 4. Feature

• Whitney 105 - Set of 4.
• Long Wearing M-2 High Speed Steel (HSS)
• Ultra sharp edge for an extra smooth cut
• Same day shippping
• Free technical support (800) 533-7117

American National Knife has been producing professional quality woodworking knives for over 30 years. Our "in-stock" inventory of planer and jointer knives is one of the largest in America and ships the same day in most cases. Our knives are produced only from professional quality solid HSS steels and carbide.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 30, 2011 10:36:04

24 x 1-1/8 x 1/8 HSS Planer Blades - Cresent - Set of 4.

24 x 1-1/8 x 1/8 HSS Planer Blades - Cresent - Set of 4. Reviews

Other Picture

24 x 1-1/8 x 1/8 HSS Planer Blades - Cresent - Set of 4. Feature

• Cresent - Set of 4.
• Long Wearing M-2 High Speed Steel (HSS)
• Ultra sharp edge for an extra smooth cut
• Same day shippping
• Free technical support (800) 533-7117

American National Knife has been producing professional quality woodworking knives for over 30 years. Our "in-stock" inventory of planer and jointer knives is one of the largest in America and ships the same day in most cases. Our knives are produced only from professional quality solid HSS steels and carbide.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 29, 2011 06:18:04

6 x 5/8 x 1/8 CT Planer Blades - Rockwell, Jet JJ-6, Boice, Woodtek, TTL, Sunhill, Bridgewood - Set of 3.

6 x 5/8 x 1/8 CT Planer Blades - Rockwell, Jet JJ-6, Boice, Woodtek, TTL, Sunhill, Bridgewood - Set of 3. Reviews

Other Picture

6 x 5/8 x 1/8 CT Planer Blades - Rockwell, Jet JJ-6, Boice, Woodtek, TTL, Sunhill, Bridgewood - Set of 3. Feature

• Rockwell, Jet JJ-6, Boice, Woodtek, TTL, Sunhill, Bridgewood - Set of 3.
• Super Long Wearing Carbide Tipped Blades
• Ultra sharp edge for an extra smooth cut
• Fast shipping
• Free technical support (800) 533-7117

American National Knife has been producing professional quality woodworking knives for over 30 years. Our "in-stock" inventory of planer and jointer knives is one of the largest in America and ships the same day in most cases. Our knives are produced only from professional quality solid HSS steels and carbide.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 27, 2011 12:06:04

DEWALT DW7352-2 13-Inch Heat Treated Double Sided Replacment Planer Knives, 2-Pack

DEWALT DW7352-2 13-Inch Heat Treated Double Sided Replacment Planer Knives, 2-Pack Reviews

Other Picture

DEWALT DW7352-2 13-Inch Heat Treated Double Sided Replacment Planer Knives, 2-Pack Feature

• Replaces the blades in the DEWALT DW735X 13-Inch, Three Knife, Two Speed Thickness Planer
• M2 laminated tool steel stays sharper and lasts longer than conventional knife materials
• Vacuum Heat Treating Provides longer blade life before user needs to flip to the second side
• New Grinding Process provides longer life with fewer nicks
• Great value with Two sets of knives in each Package

Includes (6) 13-in Replacement Planer Knives for DW735 - DW7352-2

Visit Store Now !!

Detail Products

• DEWALT DW7351 Folding Table for DW735 Planer
• DEWALT DW7350 Planer Stand with Integrated Mobile Base
• Woodstock W1044 4-to-2-1/2-Inch Reducer
• Wixey WR510 Digital Planer Readout with Fractions
• DEWALT DW735X 13-Inch Three Knife Two Speed Thickness Planer

Detail Reviews

Jul 25, 2011 18:15:20

24-1/4 x 1-1/8 x 1/8 HSS Planer Blades - Crescent - Set of 4.

24-1/4 x 1-1/8 x 1/8 HSS Planer Blades - Crescent - Set of 4. Reviews

Other Picture

24-1/4 x 1-1/8 x 1/8 HSS Planer Blades - Crescent - Set of 4. Feature

• Crescent - Set of 4.
• Long Wearing M-2 High Speed Steel (HSS)
• Ultra sharp edge for an extra smooth cut
• Same day shippping
• Free technical support (800) 533-7117

American National Knife has been producing professional quality woodworking knives for over 30 years. Our "in-stock" inventory of planer and jointer knives is one of the largest in America and ships the same day in most cases. Our knives are produced only from professional quality solid HSS steels and carbide.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 24, 2011 19:07:07

JET 708817 QCK-15DX, Quick Change Knife Set

JET 708817 QCK-15DX, Quick Change Knife Set Reviews

Other Picture

JET 708817 QCK-15DX, Quick Change Knife Set Feature

• Fits JET® JWP-15DX closed stand planer

Includes QCK-15DX, Quick Change Knife Set - 708817

Visit Store Now !!

Detail Products

Detail Reviews

Jul 22, 2011 23:55:04

HTC TS-9036 Tool Saver Machine Cover Small 27-Inch x 36-Inch

HTC TS-9036 Tool Saver Machine Cover Small 27-Inch x 36-Inch Reviews

Other Picture

HTC TS-9036 Tool Saver Machine Cover Small 27-Inch x 36-Inch Feature

• 27" X 36" Ideal for bench top tools
• Rugged cotton sheathing with plasticol coating
• Breathable yet water resistent
• Rolled hem with rubberized magnets on each corner

Condensation and the rust it brings on are all too often the results of ordinary machine covers. This HTC cover is of a strong, durable cotton sheeting that is skip-coated with a special plastisol. The resulting cover is water resistant, but breathes so condensation doesnt collect. The covers have the hems rolled around the entire perimeter, with a rubberized magnet sewn into each corner. These durable silver-colored protectors are useful around the house, but are sized for woodworkers.

Visit Store Now !!

Detail Products

• HTC TS-9056 Tool Saver Machine Cover, Medium (36-Inch x 56-Inch)
• HTC TS-9072 Tool Saver 56-by-72-Inch Large Machine Cover
• HTC TS-9112 Tool Saver 72-by-112-Inch Jumbo Machine Cover
• Bench Dog 10-035 Bench Cookie Work Grippers, 4-Pack
• DEWALT DW7350 Planer Stand with Integrated Mobile Base

Detail Reviews

Jul 21, 2011 17:11:27

HSSK-041, Replacement Planer Knife For For Dewalt DW735, 13" x 7/8" x 3/16", 3 In Set

HSSK-041, Replacement Planer Knife For For Dewalt DW735, 13" x 7/8" x 3/16", 3 In Set Reviews

Other Picture

HSSK-041, Replacement Planer Knife For For Dewalt DW735, 13" x 7/8" x 3/16", 3 In Set Feature

• Thicker - Not your flimsy OEM knives, these new knives measure a full 3/16" thick.
• Sharper - Edge sharpened with our proprietary ceramic-bond silicon carbide wheel.
• Lasts Longer - Testing proves dramatic improvement in life vs. OEM steel knives.
• 13" (A) x 7/8" (B) x 3/16" (C). Three knives are included in the set.

Tired of dull planer knives? Our newly improved replacement knives for your DeWalt DW735 planer are the finest you can purchase. Now thicker than the original OEM knives and lasts up to 4x longer, even in tough material. Forged from a premium grade of European HSS produced for us by the famed Bohler steel mill in Austria. They make this high-chromium steel in the same location where the company was founded in 1446. It's extreme resistance to abrasion and wear make it the ideal material for woodworking. These knives have two ground edges and measure 13" (A) x 7/8" (B) x 3/16" (C). Three knives are included in the set.

Visit Store Now !!

Detail Products

• DEWALT DW7351 Folding Table for DW735 Planer
• DEWALT DW7350 Planer Stand with Integrated Mobile Base
• DEWALT DW735X 13-Inch Three Knife Two Speed Thickness Planer
• Robert Larson 800-1800 Honing Guide
• POWERTEC HSS Planer Blades for DeWalt 13" Planer DW735

Detail Reviews

Jul 20, 2011 04:01:05

Vermont American #0 Plate Joiner Biscuit 17141

Vermont American #0 Plate Joiner Biscuit 17141 Reviews

Other Picture

Vermont American #0 Plate Joiner Biscuit 17141 Feature

• Vermont American #0 Plate Joiner Biscuit 17141
• VERMONT AMERICAN

Compressed wafer shaped beech biscuits for wood joining. Expands when used with a water based glue. Ideal for medium size furniture, cabinet, trim and special woodworking projects. #0: 5/8" x 1-3/4"; #10: 3/4" x 2-1/8"; #20: 1" x 2-1/2".

Visit Store Now !!

Detail Products

Detail Reviews

Jul 19, 2011 08:46:05

20 x 1 x 1/8 (4) HSS Planer Blades - Grizzly 20", Jet 208, Powermatic 209, Parks, TTL, Sunhill, Northstate - Set of 4.

20 x 1 x 1/8 (4) HSS Planer Blades - Grizzly 20", Jet 208, Powermatic 209, Parks, TTL, Sunhill, Northstate - Set of 4. Reviews

Other Picture

20 x 1 x 1/8 (4) HSS Planer Blades - Grizzly 20", Jet 208, Powermatic 209, Parks, TTL, Sunhill, Northstate - Set of 4. Feature

• Grizzly 20", Jet 208, Powermatic 209, Parks, TTL, Sunhill, Northstate - Set of 4.
• Long Wearing M-2 High Speed Steel (HSS)
• Ultra sharp edge for an extra smooth cut
• Same day shippping
• Free technical support (800) 533-7117

American National Knife has been producing professional quality woodworking knives for over 30 years. Our "in-stock" inventory of planer and jointer knives is one of the largest in America and ships the same day in most cases. Our knives are produced only from professional quality solid HSS steels and carbide.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 17, 2011 11:19:03

36-5/16 x 1-3/8 x 5/32 HSS Planer Blades - Whitney - Set of 4.

36-5/16 x 1-3/8 x 5/32 HSS Planer Blades - Whitney - Set of 4. Reviews

Other Picture

36-5/16 x 1-3/8 x 5/32 HSS Planer Blades - Whitney - Set of 4. Feature

• Whitney - Set of 4.
• Long Wearing M-2 High Speed Steel (HSS)
• Ultra sharp edge for an extra smooth cut
• Same day shippping
• Free technical support (800) 533-7117

American National Knife has been producing professional quality woodworking knives for over 30 years. Our "in-stock" inventory of planer and jointer knives is one of the largest in America and ships the same day in most cases. Our knives are produced only from professional quality solid HSS steels and carbide.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 16, 2011 10:46:24

4 x 3/4 x 1/8 HSS Planer Blades - Grizzly 4" 3 Knife Head - Set of 3.

4 x 3/4 x 1/8 HSS Planer Blades - Grizzly 4" 3 Knife Head - Set of 3. Reviews

Other Picture

4 x 3/4 x 1/8 HSS Planer Blades - Grizzly 4" 3 Knife Head - Set of 3. Feature

• Grizzly 4" 3 Knife Head - Set of 3.
• Long Wearing M-2 High Speed Steel (HSS)
• Ultra sharp edge for an extra smooth cut
• Same day shippping
• Free technical support (800) 533-7117

American National Knife has been producing professional quality woodworking knives for over 30 years. Our "in-stock" inventory of planer and jointer knives is one of the largest in America and ships the same day in most cases. Our knives are produced only from professional quality solid HSS steels and carbide.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 15, 2011 09:58:04

400 mm Tersa system Solid Carbide blade

400 mm Tersa system Solid Carbide blade Reviews

Other Picture

400 mm Tersa system Solid Carbide blade Feature

• 400 mm Tersa system Solid Carbide blade
• Ultimate Long wearing Solid Carbide
• Ultra sharp edge for a superior finish
• Same day shipping on most items
• Free technical support (800) 533-7117

American National Knife has been producing professional quality woodworking knives for over 30 years. Our "in-stock" inventory of planer and jointer knives is one of the largest in America and ships the same day in most cases. Our knives are produced only from professional quality solid Solid Carbide steels and carbide.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 14, 2011 05:12:07

20" 4 knife planer blades for cabinet shop planers

20" 4 knife planer blades for cabinet shop planers Reviews

Other Picture

20" 4 knife planer blades for cabinet shop planers Feature

• Fit all Taiwanese machines with a CT-508 model number
• Replaces JET, ENCO, LOBO, STAR, ENLON, etc
• High quality at an affordable price!

These 20" planer knives are ideal for replacing the worn out knives on your machine! They are app 20" long x 1/8" thick x 1" wide and can be resharpened many times. Will fit our ACCURA 20" 4 knife machine as well as any of the 4 knife Taiwanese made cabinet shop planers sold by many of our now defunct competitors such as Reliant, Star, Enlon, etc. Will also fit Jet, Lobo, Grizzly, Shop Fox, Powermatic and other machines from the same factory (most have a CT-508 model number somewhere on the machine). We also offer these in a 2 set special on another listing.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 12, 2011 18:05:09

Wixey Electronic Digital Readout for Planers

Wixey Electronic Digital Readout for Planers Reviews

Other Picture

Wixey Electronic Digital Readout for Planers Feature

• Includes readout, stainless steel scale, graphic scale sticker, battery,
• Fits portable planers from DeWalt, Delta, Ridgid, Ryobi, Craftsman and others.
• Features absolute measuring mode with memory and incremental mode that re-sets to 0.000'' or 0.00 mm.
• Calibrates in seconds.
• Mounts in minutes.

Affordable attachment accurately displays the thickness of the board exiting the planer. Eliminates the need for tape measure or calipers. Measurements in inches or mm. Fits portable planers from DeWalt, Delta, Ridgid, Ryobi, Craftsmen and others.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 11, 2011 09:33:04

16.14? (410 mm) x 30mm x 3 mm CT Planer Blades - SCMI 410 - Set of 4.

16.14? (410 mm) x 30mm x 3 mm CT Planer Blades - SCMI 410 - Set of 4. Reviews

Other Picture

16.14? (410 mm) x 30mm x 3 mm CT Planer Blades - SCMI 410 - Set of 4. Feature

• SCMI 410 - Set of 4.
• Super Long Wearing Carbide Tipped Blades
• Ultra sharp edge for an extra smooth cut
• Fast shipping
• Free technical support (800) 533-7117

American National Knife has been producing professional quality woodworking knives for over 30 years. Our "in-stock" inventory of planer and jointer knives is one of the largest in America and ships the same day in most cases. Our knives are produced only from professional quality solid HSS steels and carbide.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 09, 2011 13:46:04